In my setup I am using a Unifi 8-port switch. My setup has a WAN capable of at most 600MBs and when the network is busy the load of the completed setup is 4 and above while the temperature gets close to the 82✬ at which point the pi would start throttling itself. I used a Raspberry Pi 3b+ running Raspberry Pi OS lite and suggest you do not go too far below the 3b+ as you’ll need the memory and CPU. Thanks.Monitor all incoming/outgoing traffic from my home network using software such as ntop. If you liked this post on how to install Ntopng on Debian 11, please share it with your friends on the social networks using the buttons on the left or simply leave a reply below. They are available 24×7 and will take care of your request immediately. Of course, you don’t have to install Ntopng on Debian 11, if you use one of our SSD VPS Hosting plans, in which case you can simply ask our expert Linux admins to install Ntopng on Debian 11 for you. On the next screen you will have to change the default password with a strong one for better security.Įnter the strong password twice and click on the “ Change Password” button.Īfter this, you will be automatically logged in to the Ntopng GUI with the changed password.Ĭongratulations! You successfully installed and configured Ntopng on Debian 11. Once, you enter admin as username and password hit on the “ Login” button. On a fresh installation the default username and password is admin. To access the Ntopng GUI visit the URL You will see the screen as described below: You should receive the following output: :~# netstat -tunlp | grep 5000 You can check the service if is running on port with the following command: netstat -tunlp | grep 5000 Save the newly created file and restart the Ntopng service. Paste the following lines of code: -local-networks " YourLocalIPaddressHere/24" # give your local IP Ranges here. Create new ntopng.start file to define the network. #Define the HTTP port for the web server. Paste the following lines of code: #Define the network interface for network monitoring. Open the Ntopng configuration file /etc/ntopng/nf sudo nano /etc/ntopng/nf īefore we access Ntopng we need to configure it. rvice - ntopng high-speed web-based traffic monitoring and analysis tool.You should receive the following output: :/opt# sudo systemctl status ntopng sudo systemctl start ntopng & sudo systemctl enable ntopngĬheck the status of the Ntopng service with the following command: sudo systemctl status ntopng Once, the Ntopng monitoring tool is installed, start and enable the service for automatic boot on system reboot. sudo apt update -yĪfter updating the system, we are ready to execute the command for installing Ntopng. Once, the package is added update the system again. To add the repository execute the commands below: cd /optĭpkg -i b Step 3. Add Ntopng Repositoryīy default Debian 11, does not contain the repository for Ntopng, so we need to add it manually. sudo apt update -y & sudo apt upgrade -y Step 2. Execute the following commands to update the system. We need to update the packages to their latest versions available before we start with the installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |